Filter
Top Products
Chapter 9
Setup Menus
Chapter 9
Setup Menus 9-27
Menu items in the range 900 to 999, relating to digital processing (Continued)
Item number Item name Settings
942 V FILTER SELECT
(Invalid in 24PsF or
23.98PsF mode.)
Set the vertical interpolation filter coefficient for HD-SD converter output.
The vertical resolution increases as the setting grows larger.
1 to 3
943
CROSS COLOR CRISP
(Invalid in 24PsF or
23.98PsF mode.)
Set the cross color crisp level for HD-SD converter output.
0x00 to 0x04 to 0x0f
950 UP CONVERTER MODE
(Invalid in 24PsF or
23.98PsF mode.)
Select the up-converter mode.
crop : Select the edge-crop mode.
l-box: Select the letter box mode.
squez: Select the squeeze mode.
951 H CROP POSITION (UC)
(Invalid in 24PsF or
23.98PsF mode.)
Adjust the “H-crop” (the horizontal position when inserting in the edge crop mode)
of the up/down converter output when menu item 950 is set to crop.
–120 to 0 to 120
952 LETTER BOX POSITION
(Invalid in 24PsF or
23.98PsF mode.)
Adjust the vertical position of the letter box mode cutout in up-converter output
when l-box is selected in menu item 950.
–120 to 0 to 120
953 UP CONVERTER
PROCESS SELECT
(Invalid in 24PsF or
23.98PsF mode.)
Select the original picture to use when converting SD to HD.
FIELD: Use field picture.
FRAME: Use frame picture.
adapt (standard mode): Set the ratio of converting from frames or fields to the
standard ratio when up-converting.
adap2 (still picture priority mode): Set the ratio of converting from frames
higher when up-converting.
adap3 (motion priority mode): Set the ratio of converting from fields higher
when up-converting.
954 DETAIL GAIN (UC)
(Invalid in 24PsF or
23.98PsF mode.)
Carry out the up-converter image enhancer adjustment. Adjust the sharpness of
edge emphasis.
0 to 40H to 7FH
955 LIMITER (UC)
(Invalid in 24PsF or
23.98PsF mode.)
Carry out the up-converter image enhancer adjustment.
Adjust the maximum detail level added to emphasize the original signal.
0 to 20H to 3FH
956
CRISP THRESHOLD (UC)
(Invalid in 24PsF or
23.98PsF mode.)
Carry out the up-converter image enhancer adjustment. Set the threshold
amplitude at which low amplitude signals are not emphasized.
0 to 8H to FH
957
LEVEL DEPEND
THRESHOLD (UC)
(Invalid in 24PsF or
23.98PsF mode.)
Carry out the up-converter image enhancer adjustment. Set the luminance range
for edge enhancement.
0 to 8 to FH
958
H DETAIL FREQUENCY
(UC)
(Invalid in 24PsF or
23.98PsF mode.)
Carry out the up-converter image enhancer adjustment. Set the central frequency
and frequency characteristic for edge enhancement.
3.2MHz: 3.2 MHz ±1.1 MHz
4.5MHz: 4.5 MHz ±1.4 MHz
5.0MHz : 5.0 MHz ±0.7 MHz
4.0MHz: 4.0 MHz ±2.0 MHz
959
H/V RATIO (UC)
(Invalid in 24PsF or
23.98PsF mode.)
Carry out the up-converter image enhancer adjustment. Set the horizontal/vertical
ratio for edge enhancement.
0 to 3 to 7
960
GAMMA LEVEL (UC)
(Invalid in 24PsF or
23.98PsF mode.)
Carry out the up-converter image enhancer adjustment. Adjust the slope of the
correction curve.
0 to 80H to 100H
(Continued)