Filter
Top Products
Chapter 10 Setup Menus
10-8 Chapter 10 Setup Menus
Item number Item name Settings
009
a)
CHARACTER TYPE
011
a)
CHARACTER V-SIZE
SYSTEM FREQUENCY
SELECT
10-3 Items in the Basic Setup Menu
Determines the type of characters such as time code output from the
COMPOSITE VIDEO OUTPUT 3 (SUPER) connector, HDSDI OUTPUT 3
(SUPER) connector, and SDI OUTPUT 3 (SUPER) connector for superimposed
display on the monitor.
[WHITE] : White letters on a black background
BLACK: Black letters on a white background
W/OUT: White letters with black outline
B/OUT: Black letters with white outline
Determines the vertical size of characters such as time code output from the
COMPOSITE VIDEO OUTPUT 3 (SUPER) connector, HDSDI OUTPUT 3
(SUPER) connector, and SDI OUTPUT 3 (SUPER) connector for superimposed
display on the monitor.
×1 : Standard size
×2: 2 times standard size
Specify whether to enable switching of the system frequency between 59.94i, 50i,
29.97PsF, 25PsF, 24PsF and 23.98PsF.
[OFF] : Disable switching.
ON: Enable switching.
When ON is selected, the menu display changes to allow switching of the
setting between 59.94i, 50i, 29.97PsF, 25PsF, 24PsF and 23.98PsF.
For the procedure for switching the system frequency, see page 10-4.
Notes
• For the basic and extended setup menus, separate settings are saved for
59.94i, 29.97PsF, 23.98PsF and 50i, 25PsF, 24PsF modes. When you switch
systems, all menu items change to the settings established in the new system.
(These are different from the settings for the mode before switching.)
• When the unit is used in 50i, 25PsF mode, analog tape can only be played back
in the simple playback mode.
013
a)When setting items 009 and 011, watch the monitor
screen, and adjust to the required state.
018
ACTIVE LINE SELECT
(Valid only in 59.94i or
29.97PsF mode)
Enable or disable switching of the number of active scan lines for HDSDI output
(OFF TAPE/1035/1080/720P).
[OFF] : Disable switching.
ON : Enable switching.
When ON is selected, the menu display changes to allow switching of the
setting between OFF TAPE, 1035, 1080, and 720P.
For the procedure for switching the number of active scan lines, see page 10-5.
(Continued)