Sony HDW-S2000P VCR User Manual


 
Chapter 10
Setup Menus
10-14
Chapter 10
Setup Menus
10-4 Items in the Extended Setup Menu
Item number
Item name Settings
301 VAR SPEED RANGE FOR
SYNCHRONIZATION
Select the playback speed range when carrying out playback in variable speed
mode from a remote control unit connected to the REMOTE-1 IN(9P) connector
or REMOTE-1 OUT (9P) connector.
–1~+2 : –1 to +2 times normal speed for HDCAM and Betacam SX tapes. –1 to
+3 times normal speed for analog tape.
~2.45 : –1.5 to +2.45 times normal speed for HDCAM and Betacam SX tapes.
–1.5 to +3.45 times normal speed for analog tape.
Menu items in the range 300 to 399, relating to editing operations
302 CAPSTAN RE-LOCKING
DIRECTION
(Invalid in 24PsF or
23.98PsF mode)
In 59.94i, 29.97PsF mode
When the function menu item CAPSTN is set to 4F, select whether the capstan
servo should lock by accelerating or decelerating.
[DECEL]: Lock by decelerating.
ACCEL: Lock by accelerating.
In 50i, 25PsF mode
When the function menu item CAPSTN is set to 4F or 8F, select whether the
capstan servo should lock by accelerating or decelerating.
DECEL: Lock by decelerating.
[ACCEL]: Lock by accelerating.
305 SYNC GRADE
307 AUTO-DELETION FOR
INCONSISTENT DATA
Select what happens when an erroneous edit point is set.
[MANU]: A warning is given by flashing the DELETE button on the lower control
panel.
The operator must manually delete the unnecessary edit points or correct the
erroneous edit point.
NEG&E: When inconsistent edit points are set, such as when an OUT point is
before an IN point, or an audio OUT point is before an audio IN point, or when
too many edit points are specified, the previously set edit point is deleted.
NEG: When inconsistent edit points are set, such as when an OUT point is before
an IN point, or an audio OUT point is before an audio IN point, the previously
set edit point is deleted. When more edit points than necessary are specified,
the DELETE button on the control panel flashes to give a warning.
Note
Pressing the button corresponding to an edit point to be deleted and the DELETE
button simultaneously deletes the edit point. If an erroneous edit point is set (the
DELETE button is flashing), editing is not executed.
306 DMC INITIAL SPEED Select the initial speed automatically set when carrying out DMC editing.
[MANU]: The speed determined by the rotation of the search dial
PLAY: Normal playback speed
STILL: Stationary
±0.03 to ±1, +2: Speed set in the range ±0.03 to +2 (select from +2, ±1, ±0.5,
±0.2, ±0.1, ±0.03)
304 EDIT FIELD SELECT Select with which fields to start and end editing using tape.
[1F]: Start editing with field 1 and end with field 2.
2F: Start editing with field 2 and end with field 1.
1F/2F: Start and end editing depending on the timing of command reception.
Note
The setting is always 1F in the following cases.
• In PsF mode
• When SDTI (option) is selected
(Continued)
When editing in phase-synchronized mode with menu item 004 set to ON, select
the target phase synchronization accuracy.
[ACCUR]: ±0 frame accuracy
ROUGH: ±1 frame accuracy