Filter
Top Products
115
Other InfoOther Info
Audio
MPEG1 quality is poor when
enlarged (page 86)
s The quality of the movie when enlarged depends on the resolution of the MPEG1
file. See your camera’s instruction manual for details.
Error message is displayed s No Memory Stick There is no Memory Stick in the slot.
s Memory Stick
Locked
The lock mechanism on the Memory Stick is engaged.
s Memory Stick Error The Memory Stick in the slot might be damaged; try a
different Memory Stick.
s Format Error The Memory Stick may have been formatted using a PC
or other device that is not compatible with cameras.
Error icon is displayed The file is not a valid MPEG1 or JPEG format, or it is a
progressive JPEG (which is not supported).
The thumbnail is not DCF-compatible.
The file is a JPEG or an MPEG1, but the thumbnail is
unreadable.
The file is unreadable.
Problem Possible Remedies
Problem Possible Remedies
Good picture, no sound s Press MUTING so that the word Muting disappears from the screen (see page 56).
s Make sure the Speaker option is set to On in the Audio Menu (see page 96).
s Make sure the MTS option is set to Stereo or Mono (see page 95).
Cannot gain enough volume
when using a cable box
s Increase the volume of the cable box using the cable box’s remote control. Then
press TV (FUNCTION) and adjust the TV’s volume.
Sound seems weak or
insufficient
s The TV’s audio might be set to Auto SAP or Mono, when it might be better set to
Stereo. In the Audio Menu (see page 95), set the MTS setting to Stereo. If
already set to Stereo, switch to Mono (which may reduce background noise
during weak stereo broadcasts).
Cannot raise the volume on
external audio speakers
s If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
order to output the sound to your audio system) use your audio receiver to adjust
the sound (see page 96). Or, to use the TV remote control, set the Audio Out
option to Variable.
s To turn on the TV speakers, set the Speaker option to On (see page 96).