Filter
Top Products
40
Setup
Notes on Using This Connection
To Do This ... Do This ...
Watch the satellite receiver Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the illustration).
The VCR may need to be turned on and set to the satellite receiver input.
Watch the VCR Press TV/VIDEO repeatedly to select the input to which the VCR is connected
(VIDEO 1 in the illustration).
Set up the remote control to
operate the satellite receiver or
VCR
If you have a non-Sony VCR or satellite receiver, you must program the remote
control. See “Programming the Remote Control” on page 58.
Activate the remote control to
operate the satellite receiver or
VCR
For the satellite receiver, press SAT/CABLE (FUNCTION). For the VCR, press
DVD/VCR (FUNCTION).
Control satellite receiver and
VCR functions with the remote
control
See “Operating a Satellite Receiver” on page 60 and “Operating a VCR” on page 61.
Label video inputs to easily
identify equipment connected to
the TV
See the instructions for setting up Video Labels on page 105.
Do not leave the Electronic Program Guide and display
indication turned on.