Filter
Top Products
specification of 2.5 Mbps for standard definition (SD) content and 10
Mbps for High Definition (HD) content.
- Test the quality of service of your LAN connection by checking ping,
jitter and packet loss. (Ping should be under 30ms, jitter should be
less than 3ms, and packet loss should be 0.)
Some applications in [Applications] are not
available./Disappeared from [All Applications].
Reset the TV to restore the TV to the factory setting. Applications will be
displayed again in [All Applications].
To reset the TV, refer to “Troubleshooting” in the paper manual supplied
with this TV.
The TV cannot access the Internet when IPv6 is set.
IPv6 may not be available, in which case set IPv6 to off. Press the HOME
button, then select [Settings] →
[Network] → [IPv6 Setup] → [Set up
IPv6 connection] → [No].
List of Contents© 2013 Sony Corporation
Top of Page
226