Sony KLV-L32M1 Flat Panel Television User Manual


 
38
Menu System
Features
The “Features” menu allows you to alter various
adjustments of the TV.
Power Saving The “Power Saving” option allows you to reduce the power consumption of the TV.
To do this:
1 After selecting this option, press
OK.
2 Press or to select Reduce.
If you switch the TV off then on again when the Power Saving option is set to Reduce, the setting remains
unchanged.
Speaker The “Speaker” Option allows you to select if you want to listen the TV from the TV
speakers or from an external audio equipment connected to the audio output jacks .
To do this:
1 After selecting this option, press
OK.
2 Press or to select the desired output.
Main:
The sound of the TV is output through the TV’s speakers.
Centre in:
When an external amplifier is connected to the TV’s CENTRE SPEAKER IN
terminals, the centre speaker sound from the external amplifier is output through the
TV’s speakers.
Off:
The sound of the TV is output through the external audio equipment.
If you have selected Centre in, the volume of the centre speaker can be altered
by pressing the 2 +/– buttons of the remote control. If you have selected Off,
the volume of the external equipment can be altered by pressing the 2 +/–
buttons of the remote control. In either case, when the volume buttons are
pressed, the % will appear indicating that the volume you are altering is from
external equipment.
Phase The “Phase” option allows you to adjust the phase of sound when using the TV’s
speakers as the centre speaker. If sound from the TV’s speaker (as centre speaker) sound
unnatural, adjust the “Phase” option.
To do this:
1 After selecting this option, press
OK.
2 Press or to select Reverse. Sound from the TV’s speakers is phase-reversed.
Phase can be adjusted only when the “Speaker” option is set to “Centre in.”
Select: Set: End:
OK
MENU
Mode :
Contrast :
Brightness :
Colour :
Hue :
Sharpness :
Backlight :
NR :
Dynamic Picture :
Colour Tone :
Reset
Personal
50
50
25
0
25
5
Auto
On
Cool
Picture Adjustment
Select: Set: End:
OK
MENU
Power Saving :
Speaker :
Phase
AV3 Output :
Standard
Centre in
Normal
Auto
Features
Select: Set: Back:
OK
End:
MENU
Power Saving :
Speaker :
Phase:
AV3 Output :
Standard
Centre in
Normal
Auto
Features
m
,