Filter
Top Products
When receiving an A2 (German) program
Broadcasting
On-screen display (Selected sound)
Sub ]
(SubsDund)
..
-------l...... Stereo
{Stereo sound}
Mono
{Regular sound}
A2 (German)
bilingual[
Main
_{M_a_in_so_U_nd_}
_
A2 (German) stereo
Receiving area
for
NICAM and A2 (German) programs
System Receiving area
NICAM
Hong
Kong, Singapore,
New
Zealand, Malaysia,
Thailand, etc.
A2 (German) Australia, Malaysia, Thailand, etc.
Notes
• If the signal is very weak, the
sound
becomes monaural automatically.
• If the stereo sound is noisy
when
receiving a NICAM program, select
"Mono". The
sound
becomes monaural,
but
the noise is reduced.
• Before receiving a NICAM stereo
program
in China, please check the
NICAM broadcast condition at
your
area. When receiving a NICAM
stereo program, the receiving conditions might
vary
depending on area. In
addition, different strength of the NICAM broadcast signal might affect
the receiving quality.
If
the
sound is distorted or noisy
when
receiving a monaural
program
through
the
lr
(antenna) terminal
Press
AlB
repeatedly
until"Mono"
appears on the screen.
To cancel the monaural
sound
setting, press
AlB
again until
II
Auto"
appears on the screen.
J
Auto
..
Mono
[----
Notes
• The "Mono" or "Auto" setting is memorized for each program position.
• Youcannot receive a stereo broadcast signal
when
the TV is in the "Mono"
setting. Normally, set the TV to "Auto".
Advanced Operations
135