Filter
Top Products
14 (GB)
Make sure that
the control
section is at the
bottom.
5 (2)
Wall
Installation / Connections
Side
3.5 (1
7
/
16
)
Wall
Units: cm (inches)
Hooked on the wall: Vertically
Front
10 (4)
10 (4)
25
(9
7
/
8
)
20
(7
7
/
8
)
Wall
WallWall
Wall
Side
Units: cm (inches)
Connections
Connecting the AC Power Cord
1 Plug the power cord into the AC IN socket. Then,
attach the AC plug holder (supplied) to the AC
power cord.
2 Slide the AC plug holder over the cord until it
connects to the AC IN socket cover.
To remove the AC power cord
Squeeze the upper and lower sides and pull out the
AC plug holder.
Connection Example
Before you start
• First make sure that the power to each piece of
equipment is turned off.
• Use connecting cables suitable for the equipment to
be connected.
• The cable connectors should be fully inserted into
the jacks. A loose connection may cause hum and
other noise.
• To disconnect the cable, pull it out by grasping the
plug. Never pull the cable itself.
• Read the instruction manual of the equipment to be
connected.
AC plug
holder
AC IN
socket
AC power
cord
AC IN
socket
cover