Sony PFM-500A3WU Flat Panel Television User Manual


 
39 (GB)
Specifications
Video processing
Preset signal Input: formats (See page
22 (GB).)
Sampling rate 13.5 to 140 MHz
Panel system AC-type Plasma Display Panel
Display resolution 510A2W: 1 024 dots × 1 024 lines
500A3W: 852 dots × 480 lines
Pixel pitch 510A2W:
0.90 (horizontal) × 0.51
(vertical) mm
(
1
16
×
1
32
inches)
500A3W:
1.08 (horizontal) × 1.08
(vertical) mm
(
1
16
×
1
16
inches)
Picture size 510A2W:
921 (horizontal) × 522
(vertical) mm
(36
3
8
× 20
5
8
inches)
500A3W:
920 (horizontal) × 518
(vertical) mm
(36
1
4
× 20
1
2
inches)
Panel size 510A2W: 42-inch (diagonal 1 058
mm)
500A3W: 42-inch (diagonal 1 056
mm)
Inputs and Outputs
RGB1
R (R-Y)/ G (Y)/B (B-Y) IN
BNC-type (×3)
0.714 Vp-p/non-composite 75-ohm
(automatic termination)
1 Vp-p/composite 75-ohm
(automatic termination)
SYNC IN (HD/COMP, VD)
BNC-type (×2)
H (or composite) SYNC, V SYNC,
1 to 5 Vp-p high impedance
AUDIO IN (L, R) Phono jack (×2)
500 mVrms, high impedance
R (R-Y)/ G (Y)/B (B-Y) OUT
BNC-type (×3) Loop-through
SYNC OUT (HD/COMP, VD)
BNC-type (×2) Loop-through
H (or composite) SYNC,
V SYNC
AUDIO OUT (L, R)
Phono jack (×2) Loop-through
RGB2
RGB IN D-sub 15-pin (See “Pin
assignment” on page 40 (GB).)
AUDIO IN (L, R) Phono jack (×2)
500 mVrms, high impedance
LINE (NTSC, PAL, SECAM, NTSC4.43, PAL60)
VIDEO IN BNC-type (×1)
Composite video, 1 Vp-p ±2 dB
sync negative, 75-ohm
(automatic termination)
Y/C IN Mini DIN 4-pin type (×1)
Y (luminance): 1 Vp-p ±2 dB sync
negative, 75-ohm (automatic
termination)
C (chrominance): Burst
0.286 Vp-p ±2 dB (NTSC),
75-ohm (automatic termination)
Burst 0.3 Vp-p ±2 dB (PAL),
75-ohm (automatic termination)
AUDIO IN (L, R) Phono jack (×2)
500 mVrms, high impedance
VIDEO OUT BNC-type (×1) Loop-through
Y/C OUT Mini DIN 4-pin type (×1) Loop-
through
AUDIO OUT (L, R)
Phono jack (×2) Loop-through
MONITOR OUT AUDIO (L, R)
Phono jack (×2)
Maximum 500 mVrms (Variable
output), high impedance
CONTROL S (IN, OUT)
Mini jack (stereo) (×2)
5 Vp-p
REMOTE (RS-232C)
Mini DIN 8-pin type (×1)
SPEAKERS 6 to 16 ohms, 7 W + 7 W (when
the impedance is 8 ohms)
Specifications