Filter
Top Products
17
Hookups and Settings
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
The remote performs the following:
If the supplied remote interferes with your other
Sony DVD recorder or player, set the command
mode number for this recorder and the supplied
remote to one that differs from the other Sony
DVD recorder or player after you have completed
“Step 6: Initial Setup.”
1 Turn off the recorder.
2 Hold down x (stop) on the recorder until
“codE” appears on the front panel display.
3 Press ./> on the recorder to select
the command mode (1, 2, or 3).
The selected command mode appears on the
front panel display.
4 Hold down the remote’s ENTER and 1, 2, or
3 of the number buttons corresponding to
the command mode selected in step 3, for
more than three seconds.
Manufacturer Code number
Sony 01 (default)
Hitachi 02
LG/Goldstar/NEC 04
Mitsubishi/MGA 13
Panasonic 19
Philips 21
Pioneer 16
RCA 10
Samsung 20
Sharp 18
Toshiba 07
Buttons Operations
TV [/1 Turns your TV on or
off.
TV VOL +/– Adjusts the volume
of your TV.
TV CH +/– Selects the channel
on your TV.
TV INPUT Switches your TV’s
input source.
If you have a Sony DVD player or
more than one Sony DVD recorder
The default command mode setting for this
recorder and the supplied remote is “3.”
The remote does not function if different
command modes are set for the recorder
and remote. Set the same command mode.
123
456
789
0
x
./>
Number buttons
</M/m/,,
ENTER
,continued