Filter
Top Products
D:\DVD
manual\Final\218839311_FM\01GB06REC.fm
master page=right
RDR-GXD500
2-188-393-11(1)
47
Recording
To stop recording during timer recording
Open the remote’s cover and press x REC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
Rec Mode Adjust
If there is not enough available disc space for the
recording, the recorder automatically adjusts the
recording mode to enable the entire programme to
be recorded. This function is normally set to “On.”
To cancel this function, press TOOLS while the
Timer List is displayed. Select “Rec Mode
Adjust” and press ENTER. Select “Off” and press
ENTER.
If the timer settings overlap
Overlapped timer settings are shown as follows.
To store the setting as shown, select “OK.” The
programme that starts first has priority and the
second programme starts recording only after the
first programme has finished (page 52).
To cancel the overlapped timer setting, select
“Cancel.”
To confirm, change, or cancel timer recording
See “Checking/Changing/Cancelling Timer
Settings (Timer List)” (page 51).
To extend the recording duration time while
recording
1 Press TOOLS during recording.
The TOOLS menu appears.
2 Select “Extend Rec” and press ENTER.
3 Press M/m to select the duration time.
You can set the duration in increments of 10
minutes, for a maximum of 60 minutes.
4 Select “OK” and press ENTER.
One Touch Timer
If you use the SMARTLINK connection, you can
easily display the timer programming menu.
When the TV is turned on or in standby mode,
insert a disc and press [TIMER]. The recorder
automatically turns on and the TV’s input is
switched to the recorder. The Timer programming
menu appears.
z Hint
You can play the recorded programme by selecting the
programme title in the Title List menu.
Notes
• If “The disc is full or nearly full” appears on the screen,
change the disc, or make available space for the
recording (DVD+RW/DVD-RW only) (page 70).
• Check that the clock is correctly set before setting the
timer recording. If not, the timer recording cannot be
made.
• Even if the timer is set for the same daily or weekly
programme, the timer recording cannot be made if it
overlaps with a programme that has priority. “ ” will
appear next to the overlapped setting in the Timer List.
Check the priority order of the settings (page 51).
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has priority.
Fri 29.10 21:00-22:00 AAB SP
Fri 29.10 21:30-22:30 DEF SP
Timer
These timer settings overlap. Do you want to continue?
OK Cancel
Extend Rec. Time
Set the timer extend function.
Tue 28.9 10:00-11:30 AAB SP
OK
Cancel
Extend Time
Off
,continued
01GB01.book Page 47 Mardi, 7. septembre 2004 9:41 09