Filter
Top Products
D:\DVD
manual\Final\218839311_FM\01GB10ADJ.fm
master page=left
RDR-GXD500
2-188-393-11(1)
90
Auto Display
Command Mode
Changes the Command Mode of the recorder if
other DVD equipment is assigned the same
Command Mode. Be sure to match the Command
Mode switch on the remote to the setting made
here. For details, see “If you have a Sony DVD
player or more than one Sony DVD recorder” on
page 21.
Factory Setup
Allows you to select the setup settings by group,
and return them to their default settings. Note that
all of your previous settings will be lost.
1 After step 3 above, select “Factory Setup,”
and press , or ENTER.
The display for selecting a group of settings
appears.
2 Select the group of settings you want to return
to default from “Settings,” “DTV Settings,”
“Video,” “Audio,” “Features,” “Options,”
“Password,” and “All,” and press , or
ENTER.
3 Select “Start,” and press ENTER.
The selected settings return to their default
settings.
4 Press ENTER when “Finish” appears.
Easy Setup
(Resetting the Recorder)
Select this to run the Easy Setup programme.
1 Press SYSTEM MENU while the recorder is
in stop mode.
2 Select “SETUP,” and press ENTER.
3 Select “Easy Setup,” and press ENTER.
4 Select “Start,” and press ENTER.
5 Follow the instructions for Easy Setup
from step 4 (page 23).
On Automatically displays
information on the screen
when the recorder is turned
on, etc.
Off Displays information only
when DISPLAY is pressed.
DVD1 Select this if the default
Command Mode conflicts
with other DVD equipment.
DVD2 Select this if the default
Command Mode conflicts
with other DVD equipment.
DVD3
The default Command Mode
of the recorder.
Settings
DTV Settings
Video
Audio
Features
Password
Options
Easy Setup
Easy Setup
SETUP
01GB01.book Page 90 Mardi, 7. septembre 2004 9:41 09