Filter
Top Products
24
Operation
FUNCTION screen setup
You can set the FUNCTION screen not to display
components you do not use.
1 Touch SETUP.
The SETUP screen appears.
2 Touch HOOK UP.
The FUNCTION HOOK UP screen appears.
3 Select the function not to be displayed and touch
NO.
To display other items, use the JOG DIAL or touch 4
or $ to scroll through the list.
To display the components set not to be displayed
Touch YES instead of NO in step 3.
z
Components that have been registered are set to “YES”
automatically.
Note
When a function does not appear in the display even though
FUNCTION HOOK UP is set to YES, turn the JOG DIAL to
display the function.
Downloading receiver data
Various types of data can be downloaded from the
receiver.
When carrying out this operation, make sure that the receiver’s
power is on, and be sure to point the commander’s transmitter/
receiver section toward the display on the receiver. Also, operate
the commander at a distance of about 1~2 meters from the
receiver.
1 Touch SETUP.
The SETUP screen appears.
2 Touch DOWNLOAD.
The DOWNLOAD screen appears.
3 Touch to select the data you wish to download and
press:
FUNCTION NAME: Names of connected components.
TUNER PRESET NAME: Broadcast station names etc.,
memorized in receiver.
CD MEMO: CD song titles or disc titles etc., from a
Sony CD changer (5/50/200/300/400 CD)
connected to the receiver with CONTROL A1/A1
cord.
Downloading starts, and the progress is displayed.
During this time, please leave the commander’s
transmitter/receiver section pointed toward the
display on the receiver.
When downloading has finished, the DOWNLOAD
screen reappears. A long beep sound is emitted to
indicate that the downloading was successful.
If a series of short beeps is emitted, redo the
downloading procedure. If this occurs, make sure the
receiver is turned on and that the commander is
pointing toward the receiver during operation.
4 Repeat step 3 to download other data.
5 Touch EXIT.
Downloading finishes and the SETUP screen
reappears.
When you touch CANCEL, the data downloaded
before you touched CANCEL will be saved.
Adjusting the Commander’s Operating Environment