Filter
Top Products
26
Operation
6 Select the MAKER.
Select the maker from the maker list.
The COMMAND list appears according to the maker
you selected.
7 Select the COMMAND.
Select the command you want to register.
The items selected in step 5 to 7 are registered in the
box selected in step 4.
The BOX Number list reappears.
z
To clear the programmed MACRO
Select the BOX Number of the MACRO you want to clear in step
4. Select “MACRO CLEAR” in the CATEGORY in step 5. The
items of the BOX are cleared.
z
To set “WAIT TIME”
Select the BOX Number of the MACRO you want to set the wait
time for in step 4. Select “WAIT TIME” in the CATEGORY in step
5.
The wait time list (1 to 10 second in 1 second increments)
appears. Select the time you want to delay. After you selected, the
BOX Number list reappears.
If you press ALL CLEAR on the SETUP screen, all the
registered MACRO programs are cleared.
z
MACRO 1 has been factory set
MACRO 1 has been factory set to power code of Sony Audio
Visual component.
Setting the function name
1 Touch SETUP.
The SETUP screen appears.
2 Touch FUNC NAME.
The FUNCTION NAME EDIT screen appears.
If FUNC NAME does not appear in the display, use
the JOG DIAL to scroll the screen until FUNC NAME
appears.
3 Touch the function that you want to edit.
Touching 4 moves list up
Touching $ moves list down
Adjusting the Commander’s Operating Environment