Filter
Top Products
18
RM-VLZ620_U (US) 4-170-639-12(1)
Controlling volume via an
amplifier
If your TV (or other video device) is
connected to an amplifier or DVD
Home Theater, you may want to
hear the sound from the speakers via
your amplifier. In this case, change
the factory preset so that you can
control the volume of your audio
device without switching the
controlling device from video to
audio each time.
To change the factory preset
of the volume control
SET/SET
indicator
9, 5
Device
Select
buttons
Example: To set the DVD
Device Select button to
control the volume via the
amplifier
1 Press and hold SET for more
than 3 seconds.
The SET
indicator
lights up.
While keeping SET held
down, press the Device
Select button for the device
you want to control the
volume via the amplifier,
then release both buttons.
The selected Device Select button
lights up.
2 Enter 9 - 5 - 5.
The SET indicator flashes three
times to indicate that the setting
mode has been entered.
3 flashes