Filter
Top Products
29
Additional Features
RM-VLZ620_U (US) 4-170-639-12(1)
SET/SET
indicator
9, 8, 1
Device
Select
buttons
SYSTEM
CONTROL
buttons
1 Press and hold SET for more
than 3 seconds.
While keeping SET held
down, press , then release
both buttons.
The SET indicator
lights up.
2 Enter 9 - 8 - 1.
The SET indicator flashes three
times to indicate that the setting
mode has been entered.
3 flashes
3 Press a SYSTEM CONTROL
button or Device Select
button you want to
program.
4 Program a consecutive
procedure.
With this example, press the
buttons in sequence as below*:
DVD
VIDEO1
* The procedure may differ depending
on your device. Program the correct
procedure for your device.