Filter
Top Products
23
Controlling Devices
RM-VLZ620_U (US) 4-170-639-12(1)
To clear the learned function
of a single button
Example: To clear the learned
function from number button
1 in DVD mode
1 Press and hold SET for more
than 3 seconds.
While keeping SET held
down, press , then release
both buttons.
The SET indicator
lights up.
2 Enter 9 - 0 - 4.
The SET indicator flashes three
times to indicate that the setting
mode has been entered.
3 flashes
3 Press the desired Device
Select button.
The selected Device Select button
lights up.
4 Press the learned button you
want to reset.
When the learned function is
cleared, the SET indicator flashes
three times and the indicators
turn off.
3 flashes
Note
To clear another function, repeat Steps 3
and 4.
5 Press SET to finish setting.
The SET indicator turns off.
To cancel the process
Press SET anytime.
To clear all the learned
functions under a specific
device mode
Example: To clear all learned
functions under DVD mode
1 Press and hold SET for more
than 3 seconds.
While keeping SET held
down, press , then release
both buttons.
The SET indicator
lights up.