Filter
Top Products
69
8-7. Initializing the System
To Select your dish type in Manual Selection:
1.
Press the MENU button on the Remote Control to display the on-screen menu.
2.
Select the DIRECTV
®
menu by pressing “ ” on the remote control.
3.
Scroll down to Initial Setup using “
E
”.
4.
Move the highlight to the right with “
G
” to choose Setup Wizard.
5.
Select the Manual Selection option and press “ ”.
6.
In the Manual Selection screen, select your dish type using “
D
”,”
E
”.
7.
Press “ ” to move to the next step of the initial setup.
Step 2. Dish Positioning
Your Location provides the coordinates of elevation, azimuth, and tilt based upon your ZIP
code. Elevation is the up/down angle of the dish. Azimuth is the side-to-side direction, while
tilt is the circular rotation of the dish itself around the pointing axis. Full instructions for the
installation of your dish are provided with your satellite dish antenna.
To enter your location:
1.
Enter your ZIP code using the digit buttons on the remote control.
2.
Press “ ” to show the elevation, azimuth and tilt.
Point your dish properly with the azimuth, elevation and tilt values given.
3.
Press “ ” to move to the next step of the initial setup.