Filter
Top Products
18
Connecting the VCR
If your STB has a Scart (EURO-AV) connector
The illustration below shows an example of connecting the STB to LINE-3 IN. In this
case, set the STB CONNECTION setting to LINE3 (see page 24).
You can watch programmes from the Set-Top Box connected to this VCR on your TV
even when the VCR is turned off using the Line Through function. When you turn on
the STB, this VCR automatically sends the signal from the STB to the TV without
turning itself on.
Note
• You cannot watch programmes from your STB on the TV while recording unless
you record a programme from your STB.
1
Set POWER SAVE to OFF or PARTIAL in the OPTIONS-2 menu.
2
Turn off the VCR.
To watch a programme from the STB, turn on the STB and the TV.
For details, see page 23.
AERIAL OUT
Scart cable (supplied with
the STB)
Scart cable (not supplied)
Aerial cable
(supplied)
STB
STB controller’s
Side view
(supplied)
iLINE-1
(TV)
tLINE-3 IN
STB
CONTROL
: Signal flow
Scart
(EURO-AV)
AERIAL IN
AERIAL IN