Filter
Top Products
78
Storing, searching and deleting programme information (Smart Search Plus)
Note
• You cannot use or return the deleted information.
About the Demonstration Mode
The Smart Search Plus function has a Demonstration Mode that allows the user, such
as a salesperson, to automatically display the Smart Search Plus screens.
To activate the Demonstration Mode
While the VCR is turned on, press and hold the both x (stop) and A (eject)
buttons on the VCR
for a few seconds. The demonstration will start and the
four kinds of Smart Search Plus screens will be displayed repeatedly. If you
operate the VCR, the Demonstration Mode temporarily stops. After about
five minutes, the demonstration will restart.
To cancel the Demonstration Mode
While the VCR is turned off, press and hold the both x (stop) and A (eject)
buttons on the VCR
for a few seconds. You can also cancel the
Demonstration Mode if you turn the power off and unplug the mains lead.
2
Press </, to select the memory bank
number to delete.
The programme information on the
selected memory bank number appears.
Check the information that you want to
delete.
3
Press CLEAR.
The programme information is deleted.
4
Press SMART SEARCH.
The SMART SEARCH screen disappears.
SMART SEARCHEXIT :
SET
SELECT
SMART SEARCH -RECALL-
:
:
OK
DATE TIME PROG.
RECALL 1 2 3 4
20:00 21:00 AAB30.9
6:30 7:00
1.10
14:00 15:00
FGH29.9
IJK
ERASE :
CLEAR
SMART SEARCHEXIT :
SET
SELECT
SMART SEARCH -RECALL-
:
:
OK
DATE TIME
NO DATA
PROG.
RECALL 1 2 3 4