Filter
Top Products
20
Setting up the VCR with the Auto Set Up function
Step 4 : Setting up the VCR with the Auto
Set Up function
Before using the VCR for the first time, set up the VCR using the Auto Set
Up function. With this function, you can set the TV channels, guide
channels for the VIDEO Plus+ system, RF cheannel, and VCR clock
automatically.
To cancel the Auto Set Up function
Press AUTO SET UP.
Notes
• If you cancel the Auto Set Up function, repeat the step above.
• Whenever you operate the Auto Set Up function, some of the settings (VIDEO
Plus+, timer, etc.) will be reset. If this happens, you have to set them again.
Hold down AUTO SET UP on the VCR for more than three
seconds.
The VCR automatically turns on, and starts searching for all of the
receivable channels and presets them in the appropriate order for
your local area.
If you want to change the order of the channels or disable unwanted
programme positions, see “Changing/disabling programme
positions” on page 34.
If you use the SMARTLINK connection, the Preset Download
function starts and the indicator flashes in the display window
during download.
After the search or download is complete, the current time appears
in the display window for any stations that transmit a time signal. If
the time does not appear, set the clock manually (see page 39).
AUTO SET UP
AUTO
SET UP
RF CHANNEL