Filter
Top Products
57
Recording TV programmes using the VIDEO Plus+ system
Basic Operations
3
Press OK.
The date, start and stop times,
programme position or station name,
tape speed, and VPS/PDC setting
appear on the TV screen.
• If “– –” appears in the “PROG.”
(programme) column (this may
happen for local broadcasts), you
have to set the appropriate programme position manually.
Press M/m to select the desired programme position.
• To record from another source connected to one or more of the
LINE inputs, press INPUT SELECT to display the connected line
in the “PROG.” position.
• To record from the Set-Top Box, press STB to display “STB---” in
the “PROG.” position. Then, enter a three digit STB channel
number with the programme number buttons.
You will only have to do this operation once for the referred
channel. The VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
4
If you want to change the date, tape
speed, and the VPS/PDC setting:
1 Press </, to highlight the item
you want to change.
2 Press M/m to reset it.
• To record the same programme
every day or the same day every
week, see “Daily/weekly
recording” on page 58.
• To use the VPS/PDC function, set VPS/PDC to ON.
For details about the VPS/PDC function, see “Timer recording
with VPS/PDC signals” on page 58.
5
Press MENU to exit the menu.
CLEAR
OK
PLAY
INPUT SELECT
STB
123
456
789
0
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENUEXIT :
TIMER
SP / LP
LIST
TIME PROG.
TODAY 519:00 20:00 3
SP VPS / PDC OFF
FRI28.9
OK
PLAY
DATE
CANCEL
SET
:
:
SELECT :
CLEAR
MENUEXIT :
TIMER
SP / LP
LIST
TIME PROG.
TODAY 519:00 20:00 3
SP VPS / PDC ON
FRI28.9
MENU
continued