Filter
Top Products
56
Recording TV programmes using the VIDEO Plus+ system
Recording TV programmes using the
VIDEO Plus+ system
The VIDEO Plus+ system is the feature that simplifies programming the VCR to
make timer recordings. Just enter the PlusCode number listed in the TV programme
guide. The date, times, and programme position of that programme are set
automatically. You can preset a total of eight programmes, including settings made
with other timer methods.
Before you start
…
• Check that the VCR clock is set to the correct time and date.
• Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording
time.
• Turn on your TV and set it to the video channel.
• Set TIMER OPTIONS to VIDEO Plus+ or VARIABLE in the OPTIONS-2 menu (see page
84).
• Refer to “Index to parts and controls” for button locations.
1
Press TIMER.
• When you set TIMER OPTIONS
to VARIABLE:
The TIMER METHOD menu
appears on the TV screen. Press
M/m to select VIDEO Plus+, then
press OK.
• When you set TIMER OPTIONS
to VIDEO Plus+:
The VIDEO Plus+ menu appears
on the TV screen.
2
Press the programme number
buttons to enter the PlusCode
number.
If you make a mistake, press
CLEAR and re-enter the correct
number.
TIMER
OK
PLAY
SET :
SELECT :
OK
MENUEXIT :
TIMER METHOD
STANDARD
VIDEO Plus+
MENUEXIT :
SET :
–
0–9
––––––– –
FRI28.9
VIDEO Plus+
PLUSCODE NO.
123
456
789
0
CLEAR
MENUEXIT :
VIDEO Plus+
SET :
–
0–9
PLUSCODE NO.
1246––– –
FRI28.9
CANCEL
CONFIRM
:
:
OK
CLEAR