Filter
Top Products
Additional Information
105
Specifications
System
Laser Semiconductor laser
Signal format system NTSC/PAL (see page 17 to switch)
Audio characteristics
Frequency response DVD (PCM 96 kHz): 2 Hz to 44 kHz (–2 dB ± 1 dB at 44 kHz)
SACD: 2 Hz to 100 kHz (–3 dB ± 1 dB at 50 kHz)
CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio (S/N ratio) 115 dB (DVD VIDEO) (AUDIO OUT L/R 1/2 jacks only)
Harmonic distortion 0.002 %
Dynamic range DVD VIDEO/SACD: 103 dB
CD: 99 dB
Wow and flutter Less than detected value (±0.001% W PEAK)
Outputs
General
Power requirements 220 to 240 V AC, 50/60 Hz
220 V AC, 60 Hz
See page 2 for further information.
Power consumption 26 W
Dimensions (approx.) 430 × 113 × 343 mm (w/h/d) incl. projecting parts
Mass (approx.) 5.3 kg
Operating temperature 5 °C to 35 °C
Operating humidity 25 % to 80 %
Supplied accessories
See page 16.
Specifications and design are subject to change without notice.
Jack name Jack type Output level Load impedance
AUDIO OUT L/R (1, 2) Phono jack 2 Vrms (at 50 kilohms) Over 10 kilohms
DIGITAL OUT (OPTICAL) Optical output jack –18 dBm Wave length: 660 nm
DIGITAL OUT (COAXIAL) Phono jack 0.5 Vp-p 75 ohms terminated
5.1CH OUTPUT Phono jack 2 Vrms (50 kilohms) Over 10 kilohms
COMPONENT VIDEO
OUT(Y, P
B
/C
B
, P
R
/C
R
)
Phono jack Y: 1.0 Vp-p
P
B
/C
B
, P
R
/C
R
: 0.7 Vp-p
75 ohms, sync negative
75 ohms
VIDEO OUT (1, 2) Phono jack 1.0 Vp-p 75 ohms, sync negative
S VIDEO OUT (1, 2) 4-pin mini DIN Y: 1.0 Vp-p
C: 0.3 Vp-p (PAL)
0.286 Vp-p (NTSC)
75 ohms, sync negative
75 ohms terminated
PHONES Phone jack 12mW 32 ohms