Filter
Top Products
82
* If you use number buttons to select the TV’s
programme position, press -/-- followed by the
number buttons for two-digit numbers.
1 Slide the TV/DVD switch to DVD.
2 While holding down [/1, press down on
the scroll key.
“AV P-90” appears in the LCD screen.
3 Release [/1.
4 Toggle the scroll key up or down to
select your AV amplifier (receiver’s)
manufacturer’s code (see the table
below).
5 Press down on the scroll key.
The manufacturer’s code flashes and the
remote is set.
Code numbers of controllable AV
amplifiers (receivers)
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your AV amplifier
(receiver).
If you do not connect an AV amplifier
(receiver), you can control your TV’s volume
by setting the code number to 90 (default).
However, you must first set the code number
of controllable TVs as explained above.
Controlling the AV amplifiers
(receivers)
When you set the TV/DVD switch to DVD,
you can control the volume of the AV
amplifier (receiver) using VOL +/–.
By pressing You can
RMT-D140A only
CH +/–, number
buttons, ENTER
Select the channel of the TV
Controlling the volume of your AV
amplifier (receiver) with the remote
[/1
VOL +/–
TV/DVD
switch
LCD screen
Scroll key
Manufacturer Code number
Sony 80, 88, 89, 91
Denon 84, 85, 86
Kenwood 92, 93
Onkyo 81, 82, 83
Pioneer 99
Sansui 87
Technics 97, 98
Yamaha 94, 95, 96