Filter
Top Products
34
qf Press X/x to select the item.
Choose the item that matches the audio connection you selected in pages 25 to 29 (
through ).
qg Press ENTER.
•When “DIGITAL OUTPUT” is selected in Step qa, Quick Setup is finished. All
connections and setup operations are complete.
If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG”
(page 92).
•When “DIGITAL & 5.1CH OUTPUT” is selected in Step qa, the Setup Display for
“SPEAKER SETUP” appears.
qh Press X/x to select the size of the centre speaker.
If no centre speaker is connected, select “NONE.” Refer to page 94 for each selection item.
qj Press ENTER.
The Setup Display for selecting the size of the rear speaker appears.
qk Press X/x to select the size.
If no rear speaker is connected, select “NONE.”
“SIDE” and “REAR” refer to the speakers’ position relative to your listening position.
Refer to page 94 for each selection item.
Audio Cord Connection Type You select Page
D-PCM 92
DTS (only if the amplifier
(receiver) has a DTS decoder)
92
B
D
C-2 D-2
B-2
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
OFF
TEST TONE:
FRONT:
CENTER:
SMALL
LARGE
NONE
LARGE
REAR:
SUBWOOFER:
To set press then
ENTER
NONE
SPEAKER SETUP
SIZE:
DISTANCE:
BALANCE:
LEVEL:
OFF
TEST TONE:
FRONT:
CENTER:
LARGE
REAR:
SUBWOOFER:
NONE
LARGE(REAR)
NONE
LARGE