Filter
Top Products
90
xDIMMER
Adjusts the lighting of the front panel display.
zBy using the FL OFF button on the player or scroll
key on the remote, you can turn on/off the front panel
display regardless the “DIMMER” setting (except
when it is set to “OFF.”)
xPAUSE MODE (DVD VIDEO/DVD-RW
only)
Selects the picture in pause mode.
xPLAYBACK MEMORY (DVD VIDEO/
VIDEO CD only)
The player can store the “SUBTITLE” and
other settings of each disc for up to 200 discs
(Playback Memory).
Set the Playback Memory function “ON” or
“OFF.”
The following settings are stored in memory
by the Playback Memory function.
— ANGLE (page 66)*
— AUDIO (page 60)*
— BNR (page 68)
— BOOKMARK (page 53)
— DIGITAL VIDEO ENHANCER (page 72)
— SUBTITLE (page 67)*
— VIDEO EQUALIZER (page 69)
∗ DVD VIDEO only
Notes
• The player can store the settings of up to 200 discs.
When you store the setting of disc number 201, the
first disc setting is cancelled.
• The Playback Memory function cannot be used for
DVD-RWs in VR mode.
• During playback, do not turn off the player by
pressing POWER on the player. Doing so may
cancel the settings. When you turn off the player,
press x first to stop playback and then press [/1 on
the remote. After the power indicator lights up in red
and the player enters standby mode, press POWER
on the player.
xTRACK SELECTION (DVD VIDEO
only)
Gives the sound track which contains the
highest number of channels priority when
you play a DVD VIDEO on which multiple
audio formats (PCM, MPEG audio, DTS, or
Dolby Digital format) are recorded.
Notes
• When you set the item to “AUTO,” the language
may change. The “TRACK SELECTION” setting
has higher priority than the “AUDIO” settings in
“LANGUAGE SETUP” (page 84).
• If PCM, DTS, MPEG audio, and Dolby Digital
sound tracks have the same number of channels, the
player selects PCM, DTS, Dolby Digital, and MPEG
audio sound tracks in this order.
xBOOKMARK RESETt
Resets the bookmarks. Select this and press
ENTER. The “BOOKMARK RESET”
display appears. Press ENTER again to erase
all of the bookmarks in all of the discs.
BRIGHT
Makes the front panel display
bright.
DARK
Makes the front panel display dark.
AUTO DARK
Makes the front panel display dark
if you do not operate the player or
remote for a short while.
AUTO OFF
Turns off the lightning of the front
panel display if you do not operate
the player or remote for a short
while.
OFF
Turns off the lighting of the front
panel display.
AUTO The picture, including subjects
that move dynamically, is output
with no jitter. Normally select
this position.
FRAME The picture, including subjects
that do not move dynamically, is
output in high resolution.
ON
Stores the settings in memory when
you eject the disc.
OFF
Does not store the settings in
memory.
OFF
No priority given.
AUTO
Priority given.