Sony DVP-S7000 DVD Player User Manual


 
Playing CDs in Various Modes
37
EN
Playing Discs in Various Modes
n
AUDIO
CHANGE
DNR
DNR
Changing the Sounds Z
With DVDs on which multilingual sounds are
recorded, you can select the language you want while
playing the DVD.
With multiplex VIDEO CDs, you can select the sound
from the right or left channel and listen to the sound of
the selected channel through both the right and left
speakers. In this case, the sound loses the stereo effect.
Press AUDIO CHANGE while playing a disc.
Each time you press the button, the indication and the
language/sound from the speakers change as follows:
pWhen playing a DVD
AUDIO 1 n AUDIO 2 n .....
pWhen playing a VIDEO CD or a CD
Press
Once
Twice
Three times
z You can also use the menu to switch the sound for
the VIDEO CD or the CD
Press MENU to display the menu. Then select L/R/
STEREO in CUSTOM SETUP to change the sound
(page 46). However, this setting does not affect the
output from the DIGITAL OUT connectors when you
play a CD.
Note
Depending on the DVD, you may not be able to change the
languages even if multilingual sounds are recorded on the
DVD.
You will hear
The sound of the left channel
The sound of the right channel
The standard stereo sound
Indication
1/L
2/R
1/L 2/R
123
456
789
0
AUDIO
1 :
ENGLISH
n
Reducing the Picture Noise
(DNR: Digital Video Noise
Reduction)
You can make the picture clearer by reducing the
picture noise.
Press DNR.
Each time you press the button, the value for DNR
changes as follows:
OFF m 1 m 2 m 3
As the value increases, the picture noise will be
reduced. However, afterimages may increase.
Notes
Depending on the disc, the effect may be difficult to tell.
The setting for DNR returns to OFF when:
you turn the power off
you open or close the disc tray