Filter
Top Products
Using the Menus
104
Clock/Timers Select to set the clock and to program your LCD projection TV
to turn on and off at two scheduled viewing times.
Sleep Allows you to select the time in
minutes (15, 30, 45, 60 or 90 min) at
you want the TV to remain on before
shutting off automatically.
Timer 1
Timer 2
You can use the Timers to program the
TV to turn on and off and tune to a
specific channel at two scheduled
viewing times.
Timer 1 and Timer 2 are not available to be set until you set the
Current Time.
1 Press V or v to highlight Timer 1 or Timer 2. To set the
timer, press b.
2 Press V or v to highlight one of the following options, then
press .
Program Select to set the Timer by day, time,
duration, and channel.
Off Select to turn off the Timer. (Your
previous settings are saved.)
3 If you selected Program in step 2, press V and v to set the
day(s), hour, minute, duration, and channel number. Press
or press b to confirm each setting and move to the
next setting.
Press B to go back to the previous setting.
4 Press MENU to exit the Menu. An LED on the front panel
will light, indicating the timer has been set.
✍ To go directly to programming Timer 1 or 2, press
instead of pressing b.
Current Time
1 Press to select Current Time.
2 Press V and v to set the current time (day, hour, and
minute). Press (or press b) to comfirm each setting
and move to the next setting. Press B to go back the
previous setting.
3 Press MENU to exit the Menu.
Option Description