Filter
Top Products
18
Installing and Connecting the TV
Connecting a Digital Satellite Receiver
Disconnect all power sources before making any connections.
1 Using three separate component video cables, connect the Digital
Satellite Receiver’s Y, P
B and PR jacks to the Y, PB and PR jacks on the
TV. Use the VIDEO 2 IN connections.
Note
This TV supports only the 480i signal format. If the TV receives a signal other than 480i,
“Non Supported Video Format” appears on the screen.
2 Using an AUDIO cable, connect the Digital Satellite Receiver’s AUDIO
OUT jacks to the TV’s AUDIO IN jacks.
Note
The Y, PB and PR jacks do not provide audio, so audio cables must be connected to
provide sound.
VIDEO OUT
(480i)
TYPE
1
L1 L2
Y
P
B
P
R
R1
AUDIO OUT
S. VIDEOOPTICAL
OPTICAL
AUDIO
OUT
R2
2
VIDEO OUT
(1080i/720p/480p)
VHF/UHF R-AUDIO-L VIDEO S VIDEO R-AUDIO-L
VIDEO 2 INVIDEO 1 IN AUDIO OUT
RL
DC IN 16.5V
YP
B
P
R
Digital Satellite Receiver
(SAT-HD200)
RK-74A (not supplied)
Rear of TV
VMC-10HG (not supplied)
P
R
PB
Y
AUDIO-R (red)
AUDIO-L (white)