Filter
Top Products
19
Installing and Connecting the TV
Connecting a Digital TV Receiver
Disconnect all power sources before making any connections.
1 Using three separate component video cables, connect the Digital TV
Set-top box’s Y, P
B and PR jacks to the Y, PB and PR jacks on the TV. Use
the VIDEO 2 IN connections.
Note
This TV supports only the 480i signal format. If the TV receives a signal other than 480i,
“Non Supported Video Format” appears on the screen.
2 Using an AUDIO cable, connect the Digital TV Set-top box’s AUDIO
OUT jacks to the TV’s AUDIO IN jacks.
Note
The Y, PB and PR jacks do not provide audio, so audio cables must be connected to
provide sound.
VHF/UHF R-AUDIO-L VIDEO S VIDEO R-AUDIO-L
VIDEO 2 INVIDEO 1 IN AUDIO OUT
RL
DC IN 16.5V
YP
B
P
R
VMC-10HG (not supplied)
Digital TV Set-top box
RK-74A (not supplied)
Rear of TV
P
R
PB
Y
AUDIO-R (red)
AUDIO-L (white)