Filter
Top Products
18
Installing and Connecting the TV
Connecting a Digital Satellite Receiver
Disconnect all power sources before making any connections.
1 Using a component video cable, connect the Digital Satellite Receiver’s
Y, P
B and PR jacks to the Y, PB and PR jacks on the TV. Use the VIDEO 3
IN connections.
Note
This TV supports only the 480i and 480p signal format. If the TV receives a signal other
than 480i or 480p, “Non Supported Video Format” appears on the screen.
2 Using an AUDIO cable, connect the Digital Satellite Receiver’s AUDIO
OUT jacks to the TV’s AUDIO IN jacks.
Note
The Y, PB and PR jacks do not provide audio, so audio cables must be connected to
provide sound.
VIDEO OUT
TYPE
1
L1 L2
Y
Pb
Pr
R1
AUDIO OUT
OPTICAL
DIGITAL
AUDIO
OUT
R2
2
COMPONENT OUT
(1080i/720p/480p/480i)
S VIDEO
OUT
Rear of TV
Digital Satellite
Receiver
(e.g. SAT-HD200,
SAT-HD300, etc)
AUDIO cable
(not supplied)
Component
video cable
(not supplied)
PR
PB
Y
AUDIO-R
(red)
AUDIO-L
(white)