Filter
Top Products
19
Installing and Connecting the TV
Connecting a Digital TV Receiver
Disconnect all power sources before making any connections.
1 Using a component video cable, connect the Digital TV receiver’s Y, PB
and PR jacks to the Y, PB and PR jacks on the TV. Use the VIDEO 3 IN
connections.
Note
This TV supports only the 480i and 480p signal format. If the TV receives a signal other
than 480i or 480p, “Non Supported Video Format” appears on the screen.
2 Using an AUDIO cable, connect the Digital TV receiver’s AUDIO OUT
jacks to the TV’s AUDIO IN jacks.
Note
The Y, PB and PR jacks do not provide audio, so audio cables must be connected to
provide sound.
Component
video cable
(not supplied)
Digital TV receiver
AUDIO cable
(not supplied)
Rear of TV
P
R
PB
Y
AUDIO-R
(red)
AUDIO-L
(white)