Filter
Top Products
Introduction
3
Using the Remote Controls
Model RM-Y181
For KV-27FV300 model
Button Description
1
MUTING Press to turn off the sound. Press again or press
to restore sound.
2
SYSTEM OFF Press to power off the equipment programmed into
the remote control, see “Programming the Remote
Control” on page 49.
3
TV/VCR Press to switch between TV and VCR mode. If you
have a non-Sony VCR, you will need to program
the remote control to recognize your VCR. For
details, see “Programming the Remote Control” on
page 49.
4
ANT
(antenna)
Press to change from VHF/UHF input to the AUX
input, press again to switch back.
5
PICTURE MODE Press repeatedly to step through the available video
picture modes: Vivid, Standard, Movie and Sports.
Also available in the Video menu. See “Using the
Video Menu” on page 34 for details.
6
SLEEP Press repeatedly until the TV displays the time in
minutes (15, 30, 45, 60, or 90) that you want the TV
to remain on before shutting off automatically.
Cancel by pressing until Sleep Off appears. While
Sleep feature is set, press once to view remaining
time.
7
JUMP Press to jump back and forth between two channels.
The TV alternates between the current channel and
the last channel that was selected.
8
TV/SAT Press to switch between the TV and SAT (satellite)
inputs when in SAT FUNCTION mode.
Press for a direct selection of Effect settings
(Simulated, WOW, TruSurround, Off), when the
remote is in TV FUNCTION mode.
See “Using the Audio Menu” on page 35 for details.
9
RESET Press to return to factory settings while in an
on-screen menu.
q;
VOL (volume) Press (+) or (-) to adjust the volume.
qa
CODE SET Use to program your remote control to operate
connected video equipment. See “Programming the
Remote Control” on page 49.
/
A
B
C
D
E
F
L
M
N
O
P
Q
G
H
I
J
K
R
S
T
U
V