Filter
Top Products
12
Operating Instructions
Cable Box and Cable
Use this connection if you subscribe to a cable system that scrambles some channels (pay
channels) but not all of them. This setup allows you to use the remote control to:
❏ change channels through your cable box when you are receiving a scrambled signal
❏ change channels through your TV
This connection also allows you to use the PIP feature when you are viewing unscrambled
channels coming directly into your TV from your cable. Scrambled signals coming through the
cable box cannot be viewed in PIP. For more information on the PIP feature, see page 24 or 26.
1 Connect the coaxial cable from your cable service to the VHF/UHF jack on your TV.
2 Using a coaxial cable (not supplied), connect the IN jack on your cable box to the TO
CONVERTER jack on your TV.
3 Using a coaxial cable (not supplied), connect the OUT jack on your cable box to the AUX
jack on your TV.
✍ Press the ANT button on the remote control to switch between the cable box and direct cable inputs.
✍ Your Sony remote control can be programmed to operate your cable box (see page 50).
✍ To use the cable box to change your channels, set your TV to channel 3 or 4. Use the Channel Fix
feature to ensure that you don’t accidentally switch channels using your TV (see page 37).
Cable coaxial de 75 ohm
Cable CATV (canales no codificados)
Cable coaxial
1
2
3
Decodificador
Parte posterior
del televisor