Filter
Top Products
16
Operating Instructions
Connecting a TV and Satellite Receiver
1 Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2 Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on
your TV.
3 Using audio/video cables (not supplied), connect AUDIO and VIDEO OUT on your
satellite receiver to AUDIO and VIDEO IN on your TV.
✍ You can use the button to switch between the VHF/UHF and VIDEO inputs.
✍ For better picture quality, use S VIDEO instead of the yellow audio/video cable. S VIDEO does not
provide sound; you still must connect the audio cables.
1
3
4
Satellite Receiver
Satellite
antenna
cable
1
2
3
From
cable/
antenna
Video (yellow)
Audio R (red)
Audio L (white)
Rear of TV