Filter
Top Products
24
3 Switch the input selector on your TV so that
the signal from the recorder appears on
your TV screen.
“Initial settings necessary to operate the DVD
recorder will be made. You can change them
later using Setup. Before you start, check that
you have made all necessary connections.”
appears.
• If this message does not appear, select “Easy
Setup” from “SETUP” in the System Menu
to run Easy Setup. For details, see “Settings
and Adjustments” on page 69.
4 Press ENTER.
The Setup Display for selecting the language
used in the on-screen display appears.
5 Select a language, and press ENTER.
The Setup Display for clock setting appears.
6 Select “Manual,” and press ENTER.
Press M/m to set the month and press ,. Set
the day, year, hour, and minutes in the same
way. The day of the week is set automatically.
If you used antenna hookup C (page 15), you
can select “Auto.” The recorder will
automatically search for a channel that carries
a time signal when you turn off the recorder
after finishing Easy Setup.
Once the clock is set, the Setup Display for
cable box/satellite receiver control appears.
7 Set the cable box/satellite receiver
control, and press ENTER.
If you want to use the cable box/satellite
receiver control (page 14), select “Yes.”
If you do not have a cable box, select “No,”
then go to step 11.
8 Enter the brand code of your cable box/
satellite receiver.
See “Cable Box/Satellite Receiver Brand
Code” (page 96).
Use M/m to select the number and </, to
move the cursor.
9 Press ENTER.
10Select the cable box output channel.
If you connect your cable box or satellite
receiver to the recorder’s audio/video input
(page 13), select “Line1,” “Line2,” or
“Line3,” then go to step 13.
Language 1/6
Select the screen Language.
English
Français
Español
EASY SETUP
EASY SETUP
Clock 2/6
Select a method for setting the clock.
If you select "Auto", this recorder will look for a
time signal when you turn it off.
Auto
Manual
Set Top Box Control 3/6
Do you want to control your set top box
with this recorder?
(Changes to the current setting will erase all timer settings.)
Ye s
No
EASY SETUP
Set Top Box Control 3/6
Enter the brand code of your set top box.
- - - -
EASY SETUP
Set Top Box Control 3/6
Select input line or Set Top Box's output channel.
Line1
Line2
Line3
Ch2
Ch3
Ch4
EASY SETUP