Filter
Top Products
46
Changing the priority of overlapped
settings
If the timer settings overlap, the program that was
set last has priority and will be recorded. A timer
recording of lower priority may be canceled, start
from the middle or stop midway through the
program.
You can change the priority of a program if
necessary.
When the timer settings overlap
The program set last has priority.
Example: You set the timer in order of A, B, and
C (setting C has first priority)
If you give setting B priority over setting C, all of
program B will be recorded and program C is
recorded only after program B has ended.
If the end time of one recording and the start
time of another are the same
The end of program A will be cut.
1 Press SYSTEM MENU.
The System Menu appears.
2 Select “TIMER LIST,” and press ENTER.
3 Select an overlapped timer setting, and
press ENTER.
indicates that the timer setting is
overlapped by another timer setting.
4 Select “Check Overlap,” and press ENTER.
5 Select “Change,” and press ENTER.
6 Press M/m to change the timer setting’s
priority, and press ENTER.
The setting moves to its new location in the
list. A timer setting higher up in the list has
higher priority.
To return to the Timer List, select “Cancel.”
z Hint
You can change the priority of a timer setting while
recording.
7:00
7:00 9:00 10:30
A
9:00 11:00
ABC
C
10:30
B
will be cut off
Actual recording
7:00 9:00 11:00
ABC
7:00 9:00 10:00
A
B
Mon 10/25
8:30PM - 9:30PM 4ch
Mon-Sat 10:00AM - 10:30AM 25ch
Fri 10/29
9:00AM - 10:15AM 3ch
Sat 10/30 4:00PM - 5:00PM 125ch
TIMER LIST
HQ
SP
SLP
SLP
10:30 PM
Mon-Sat 10:00AM - 10:30AM 25ch SP
Fri 10/29 9:00AM - 10:15AM 3ch SLP
Check Overlap
These timer settings overlap.
Change Close
Fri
10/29 9:00AM - 10:15AM 3ch SLP
Where do you want to move this timer setting?
Mon-Sat 10:00AM - 10:30AM 25ch SP
Change priority
Cancel