Filter
Top Products
TV menu system
27
OK
1
4
7
3
6
9
2
5
8
8
0
DIGITAL
DIGITAL
Manual Programme Preset menu
(for analogue channels only)
To check which mode you are in, press the button on the remote control. If you are
watching a digital programme, an Info display appears on screen providing brief details
for the current and next programme. If this happens, press the DIGITAL/ button on
the remote control to switch to analogue channels.
The ‘Manual Programme Preset’ option in the ‘Manual Set Up’ menu allows you to
manually tune in channels. With the ‘Manual Programme Preset’ option highlighted,
press b to enter the ‘Manual Programme Preset’ menu. Press v or V to highlight the
channel you wish to tune. Press b twice to select the SYS column. Press v or V to
select the TV broadcast system (Choose B/G or DK for TV broadcasts or EXT for an
external input source). Press b to confirm and select the CH column. Press v or V to
select the channel tuning (C for terrestrial channels, S for cable channels or F for direct
frequency input). Press b to confirm. You now need to tune the channel by one of the
following methods:
(a) If you know the channel number of the TV broadcast, the VCR test signal or the
frequency:
Press the numbered buttons on the remote control to enter the channel number.
Press OK to store.
(b) If you do not know the channel number:
Press v to select SEARCH. The TV set automatically searches for the next
available TV broadcast channel or the VCR test signal. When a channel has
been found press either OK to store or v to continue searching.
(c) For external input sources (EXT):
Press v to select AV1, AV2, AV3 or AV4 depending on which socket you have
connected your equipment to. Press OK to store.
Naming a channel
Names for channels are usually taken automatically from Teletext (if available). This
name will be displayed briefly on screen when the channel is selected. The ‘LABEL’
option in the ‘Manual Programme Preset’ menu allows you to assign a name of your
choice up to 5 characters or numbers. With the ‘Manual Programme Preset’ option
highlighted, press b to enter the ‘Manual Programme Preset’ menu. Press v or V to
highlight the channel number you require. Press b repeatedly to select the LABEL
column. Press v or V to select the first character. Press b to confirm this character.
Select the other characters in the same way. After selecting all required characters,
press OK to store.
Skipping a channel
The ‘SKIP’ option in the ‘Manual Programme Preset’ menu allows you to skip unused
channel positions when selecting channels with the PROG+/- buttons. However, you
can still select skipped channels by using the numbered buttons on the remote control.
With the ‘Manual Programme Preset’ option highlighted, press b to enter the ‘Manual
Programme Preset’ menu. Press v or V to highlight the channel number you require.
Press b to select the SKIP column. Press v to select On (select Off to remove the SKIP
feature). Press OK to store.
GBpages23-32.fm Page 27 Friday, March 7, 2003 10:29 AM