Filter
Top Products
TL H.264 DVR User’s Manual
29
The general operations in playback mode are described as follows.
Key Usage in Playback
The key usage is slightly dif ferent in playback mode. Following is the key
usage found in playback mode.
z LEFT (Reverse Playback): The key is used to reverse the recorded video
while the unit is playing back. Press the key repeatedly to increase the
speed of reverse playback by 1×, 2×, 4×, 8×, 16×, or 32×.
z RIGHT (Forward Playback) :The key is used to play the recorded video
fast forward. Press the key repeatedly to increase the speed of forward
playback by 1×, 2×, 4×, 8×, 16×, or 32×.
z FREEZE: Press FREEZE to pause the playback video. When the
recorded video is paused, press LEFT / RIGHT to resume playback video
single step reverse / forward, respectively. Press FREEZE again to
continue playing video.
z PLAY: Press it to start playing back video, exit current mode, or stop
playing back video and return to live mode.
Pause Playback and Single Step Forward
To pause and resume recorded video, follow these steps.
• Press any CHANNEL key to view the corresponding camera in full screen.
• Press FREEZE to pause the current playback image.
• Press LEFT / RIGHT Direction keys to move the video single step reverse
/ forward. Press and hold LEFT / RIGHT keys to r epeatedly reverse /
forward the video single step.
• Press FREEZE again to resume the playback operation.
4.1.5 Capture Snapshots
When a liv e or playback video of a singl e channel display is p aused, users
can press ENTER key to capture and export snapshots to an external storage
device, excluding optical drives. Note that the system log will keep a record of
any snapshot exportation.