Filter
Top Products
TL H.264 DVR User’s Manual
58
ezDDNS
ezDDNS enables the users to register for host name automatically. Press
ENTER and select <Yes>. The following screen will be displayed:
ezDDNS Submit/update ok!
Host name is XXXX_XXXXXX
Press any key to return
NOTE: The DVR must be connected to the *Real IP address, or be
assigned a specific port using **Port Forwarding technique.
*A "Real IP" is the IP address that is assigned by users’ ISP.
**A "Virtual IP" is the IP address assigned either manually or through
DHCP. When the user is assigned a Virtual IP, the user must use Port
Forwarding technique to assign a specific port to the DVR.
5.1.7.7 UPnP Setup
UPnP is the abbreviation for Universal Plug and Play, which is a technology
that integrates a universal protocol for widespread plug-and-play devices to
ease the network implementation. When a PC and a DVR both installed the
UPnP function, the PC can automatically recognize the DVR in the same
local area network. The advantage of this function is that PCs can connect to
the DVR via the remote control software by directly clicking on the icon
representing the DVR in <My Network Places> folder. The menu will be as
the following.
UPnP Setup
1. UPnP
2. UPnP NAT Traversal
On
No
UPnP
Set the first item UPnP to <ON> and the DVR is now with UPnP function.
UPnP NAT Traversal
The UPnP NAT traversal function will help to automatically setup a router if
the DVR connects to the internet via a router. Select <Yes> and the settings
of router will be taken care by the DVR itself.