Filter
Top Products
TL H.264 DVR User’s Manual
81
5.8.2 Import Configuration
This item allows users to load a DVR configuration that was saved in an
external drive. To import a configuration that was previously exported, make
sure the device with the saved configuration is connected to the DVR. Select
<Import Config> from the Configuration menu and press ENTER. The
following menu is displayed.
Import Config
Config Name
xxxx-xxxx
xxx-xx
Select
No
No
Press UP/ DOWN to select one of the available configuration files, and
choose <Yes> to start importing the configuration.
NOTE: If the record mode
and/or number of IP cameras of the imported
configuration are different from the DVR’s configuration, the following
message will be displayed.
Warning!! System will reboot if
record mode and/or IP camera number
differ.
ENTER: Yes ESC: No
NOTE: DO NOT remove the external device before the DVR
completely reboots, otherwise it will be formatted.
5.8.3 Export Configuration
Users are allowed to save a DVR configuration by exporting it to an external
drive, such as an USB Flash Drive. Before exporting the configuration, make
sure the device in which the configuration will be saved is attached to the
DVR appropriately. Select <Export Config> from the Configuration menu and
press ENTER. The following menu is displayed. Items in this menu are
described in the following sections.
Export Config
1. Copy Destination
2. Config Name
3. Begin Export
No