Filter
Top Products
TL H.264 DVR User’s Manual
76
5.6.6 Email Full Screen
This function allows the DVR to display the alarm channel in full screen size
when an alarm is triggered.
Select <None> to disable this function; select <Main> to display the alarm
channel on Main Monitor when an alarm is triggered; select <Call> to display
the alarm channel on Call Monitor; and select <Both> to display the alarm
channel on both Main Monitor and Call Monitor.
5.6.7 Event Duration
This item determines the duration of the buzzer and Alarm Out relay function
after an alarm is triggered. The available event duration range is from 5
second to 999 seconds.
5.6.8 Per Channel Config
This menu is used to set the Video Loss Detect, Motion Detect and Alarm In /
Out function for each channel. The menu is displayed as below.
Per Channel Config
1. Channel Select
2. Video Loss Detect
3. Motion Detect
4. Motion Detect Indicator
5. Detection Config
6. Alarm In
7. Alarm Out
CH01
OFF
OFF
ON
OFF
None
5.6.8.1 Channel Select
The item is used to select a desired channel for setting the parameters. Move
the cursor to <Channel Select> and press ENTER, then select a channel
using UP / DOWN keys. Press ENTER again to confirm the selection.
5.6.8.2 Video Loss Detect
This item allows users to enable or disable Video Loss as an alarm event.
Select <ON> to enable Video Loss alarm events, or <OFF> to disable.