Filter
Top Products
Page 20
Watching TV
INITIAL INSTALLATION CONTINUED
Antenna & Cable/STB
Select the type of connection you will use to watch TV.
6. Press / to select “Antenna & Cable” or “Set-top box”, and then press ENTER.
To watch TV via an antenna or cable connection (without using a set-top box):
Select “Antenna & Cable”, and then go to step 7.
To watch TV via a set-top box:
1. Select “Set-top box”, and then press ENTER.
2. Check that the set-top box connected to the TV is turned on.
3. To watch TV, select the input source corresponding to the terminal connected to
the set-top box. When doing so, you must make the setting to skip “TV”. Press /
to select “On”, and then press ENTER.
• When this is set to “On”, the channel on the TV cannot be changed using the
remote control unit or menu. (e.g. CH +/-, Favorite CH, etc.)
• See page 38 for details on the Input Skip function.
• Press INPUT to select the input source corresponding to the terminal connected
to the set-top box. Make the necessary settings on the connected external
equipment.
• See the operation manual of the connected equipment for setting up the
equipment.
Air/Cable (Antenna setting)
Make sure what kind of connection is made with your TV when selecting “Air” or “Cable”.
4. Press / to select “Air” or “Cable”.
5. Press ENTER to enter the setting.