Filter
Top Products
SunbriteTV Veranda 4k Operators Manual
Page 9
TV Installation
REAR PANEL CONNECTIONS
1. HDMI 1 & 2: Connects to devices that use HDMI cables such as Blu-ray or HD DVD player or HD cable / satellite set-top box.
This connection port receives pure digital audio and high denition signal through one single cable. This port also can
accept a HDCP video device for video or PC for monitor display usage. Use the SOURCE button to select HDMI1 on your MAIN
SOURCE to view this connection. Please note: when using HDMI, your sound signal must be PCM for the TV to decode digital
audio. When using this source for PC display, you must connect the audio cable to VGA Stereo Input for audio.
2. HDMI 3: AUDIO RETURN CHANNEL-
3. HDMI 4: MOBILE HIGH-DEFINITION LINK-
4. USB 1 & 2: Connect to a USB device to view, photos, movies, and play audio les.
5 6 8
4 3
HDMI
USB
2
2
1
1
3 2 1
7
4
9
5. Ethernet Terminal: This connection port is used for service only
6. Digital Audio Out: This connection port is used for sending out audio signals to other audio devices such as stereo/surround
sound receivers via an optical connection.
7. Analog Audio Out: This connection port is used for sending out audio signals to other audio devices such as stereo/surround
sound receivers via an analog connection.
8. Component/Video In: These connection ports are for DVD players or satellite/cable set-top boxes that use component cables.
From left to right, connect green, blue and red for video, and then connect white for left channel audio, red for right channel
audio. Use the Source Button to select Component to view this connection.
9. Cable/Antenna In: This connection is for digital or analog cable via cable box or over-the-airwave antennas.