Filter
Top Products
Page 22
Direct Button Operation
CHANGING CHANNELS
You can change channels in several ways.
Method 1
Using CH +/- on the remote control unit or on the TV.
Method 2
Using remote control buttons 0-9, - (Dash).
Examples:
To select a 1 or 2 digit channel number (e.g., Channel 5):
Press 5 ENTER
To select a 3-digit channel number (e.g., Channel 115):
Press 1 1 5 ENTER
To select a 4-digit channel number (e.g., Channel 22.1):
Press 2 2 -(Dash) 1 ENTER
Method 3
Selecting the program from the Channel list.
1. Press INPUT on the remote.
• The INPUT list displays.
2. Press / to select “AIR” or “CABLE”.
• The Channel list displays.
3. Press / to select the desired channel, and then press ENTER.
NOTE:
• When selecting a 1-digit channel number, it is not necessary to press 0 before the
number.
• When you enter 0-9 only, channel selection will be made if there is no operation
within a few seconds.
• If you push “0” by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter 0-9 and - (Dash), channel selection will be made if there is no
operation within a few seconds.
CHANGING VOLUME
You can change the volume by pressing VOL +/- on the TV or on the remote.
• To increase the volume, press VOL +.
• To decrease the volume, press VOL -.