Filter
Top Products
4-3
Chapter 4: System Interface
as long as the temperature is too high or a fan does not function properly.
NIC: Indicates network activity on either LAN1 or LAN2 when flashing •
.
4-4 Drive Carrier LEDs
The SC827 chassis uses SAS/SATA drives.
SAS/SATA Drives
Each SAS/SATA drive carrier has two LEDs.
Blue: Each Serial ATA drive carrier has a blue LED. When illuminated, this blue •
LED (on the front of the SATA drive carrier) indicates drive activity. A connection
to the SATA backplane enables this LED to blink on and off when that particular
drive is being accessed.
Red: The red LED to indicate an SAS/SATA drive failure. If one of the SAS/SATA •
drives fail, you should be notied by your system management software.
SCSI Drives
This chassis does not support SCSI drives at this time.