5-5
Chapter 5: Chassis Setup and Maintenance
The drives are mounted in drive trays to simplify their installation and removal from
the chassis. These trays also help promote proper airow for the drive bays.
Figure 5-4: Chassis Drive Tray
Installing a Drive into the Hard Drive Tray
Remove the screws (2) holding the drive to the tray.1.
Remove the drive from the tray.2.
Warning: Except for short periods of time while swapping hard
drives, do not operate the server with the hard drives bays
empty.
Figure 5-5: Removing Dummy Drive from Tray
Drive Tray
Dummy Drive
!
1
1