Filter
Top Products
SC827 Chassis Manual
5-16
Riser
Card
Riser
Card
Screw
PCI Slot
Shield
Add-on Card
Installing Add-on Cards
Disconnect the power supply, lay the chassis on a at surface, and open the 1.
chassis cover.
Pull out the motherboard node drawer from the chassis.2.
Pull open the add-on card slot clip in the rear of the motherboard node 3.
drawer.
Remove the PCI slot shield.4.
Place the add-on card into the motherboard node drawer. 5.
Slide the add-on card into the rear riser card slot and t the add-on card 6.
bracket with the opening in the rear of the motherboard node drawer.
Close the add-on card slot clip.7.
Figure 5-16: Installing the Add-On Card